Product Categories
Contact Us

East Bright Technology Limited

ADD:4/F.Meijie Industry and Trade Center, Chenwubei District Changping town, Dongguan City Guangdong province China,523582


Home > News > Content
LED Ceiling Light A Luminaire Embedded In The Ceiling For Light
East Bright Technology Limited | Updated: Nov 06, 2017

LED Ceiling Light is a kind of lighting lamp which is embedded into the light in the ceilings. Not because of the lighting set up to destroy the ceiling art perfect unification. Its biggest feature is to maintain the overall unity and perfection of architectural decoration, with a structural advantage is the use of light source hidden building decoration interior, LED light source is not exposed, do not stimulate the eye skin! Note To install:

1. Because ceiling, ceiling awning (such as ordinary plank, sturdy plank, lime plaster Board, lime-coated cement, synthetic papaya ceiling, etc.) is different, so some situations need to use screw fixed fixture.

2. As the lighting is more heavy, when the installation, please notify the relevant engineering personnel (such as electrician) according to the strength of the smallpox hardness of the purchase expansion screws or lengthened reinforcement screws, installation of the corresponding force screws.

3. LED Day lantern belongs to electrical products, installation must please have experience and relevant documents of professional electrician help to assist the installation, in order to avoid unnecessary safety accidents. LED Ceiling lamp Please test the light before fixing installation.

4. The installation of LED lanterns before the entire circuit must be inspected to avoid leakage phenomenon, resulting in personal safety, before the installation of professional electricians to install, do not install.

5. Confirm the working voltage of the lamp, before adding electricity to the lamp, please confirm whether the working voltage of the lamp is correct, and the false connection voltage may cause permanent damage to the lamp.

6. Installation of LED ceiling lamp should avoid installation at the heat source and hot steam, corrosive gas sites, so as not to affect the life.

7. Remember to cut off the power supply before installation, turn off the switch, in addition to prevent electric shock, before installation please check the size of the installation hole to meet the requirements at the same time to check the wiring terminals and power input line connection is solid, if the loose please lock after the operation, otherwise it may cause the lamp is not normal light; If there are gaps, please make appropriate adjustments. Packaging Specifications: Inner Packing: small carton/single outer packing: Carton/12 Transport, storage requirements: Led days before installation for carton packaging, in the transport process is not allowed to be subjected to severe mechanical impact and exposure to rain, do not touch the surface of the bulb. Try not to install in the place with heat source and corrosive gas!

8. The product uses the high pressure ($number) power supply the lamp cup, should not work in the frequent power outage condition.

9. The installation holes on the ceiling of the mall are opened in advance according to the required dimensions, and the power cords are connected to the terminal terminals of the luminaire. After the completion of the wiring confirmation check installation, the spring card will be erected, and the lamp body inserted into the installation hole, the force up top, LED ceiling lamp can be embedded automatically. Connect the power supply, the lamp can work normally. 10. Misunderstanding: The installation site selection in the absence of vibration, no sway, no fire hazard open location, attention to avoid high-altitude fall, hard objects collide, percussion. Long term does not apply to place in dry ventilated place! Cable laying should be in turn by the use of electrical equipment by far to near the distribution room, in the pipe mouth of the cable pipe using flame-retardant sealing material for sealing. Motor, on-site operation column and other electrical equipment and cable pipes using explosion-proof flexible connection, other please refer to the purchase of lamps attached to the installation instructions, the reference manual for installation and use.


1, LED ceiling lantern energy saving. White LED energy consumption is only 1/10 of the incandescent light, energy-saving lamp 1/4.

2, LED Day lantern longevity. Life can reach more than 100,000 hours, for ordinary family lighting is "once and for all."

3, LED ceiling lamp can work at high speed state. Energy-saving lamps if the frequent start or shut down the filament will be black and quickly broken.

4, LED Day lantern is a solid-state package, belongs to the type of cold light. So it is convenient to transport and installation, can be installed in any micro-and closed equipment, not afraid of vibration, must consider heat dissipation, heat.

Copyright © East Bright Technology Limited All rights reserved.