Product Categories
Contact Us

East Bright Technology Limited

ADD:4/F.Meijie Industry and Trade Center, Chenwubei District Changping town, Dongguan City Guangdong province China,523582


Home > News > Content
LED Ceiling Light Installation Instructions
East Bright Technology Limited | Updated: Jun 20, 2017

  LED ceiling light installation instructions

  LED ceiling light is a kind of embedded in the ceiling under the light of the lighting type lighting. Not because of the setting of the lamp and destroy the perfect unity of the ceiling art. Its biggest feature is to maintain the overall unity of the building decoration and perfect, with the structural advantages of the use of light source hidden building decoration inside, LED light source is not exposed, do not stimulate the eye skin! Installation need to pay attention:

  1. Because the ceiling, ceiling (such as ordinary wood, solid wood, lime paste board, lime coating cement, synthetic papaya ceiling, etc.) of the force is different, so some cases need to use screws to fix the lamp.

  2. As the lighting is relatively heavy, when the installation, please inform the relevant engineering staff (such as electrical) according to the hardness of the ceiling force and the purchase of expansion bolts or lengthened screws, the installation of the corresponding force screw.

  3.LED ceiling lights are electrical products, installation must have experience and related documents of professional electrician master to help assist in the installation, so as to avoid unnecessary safety accidents. LED Ceiling Light Please try to test before installing it.

  4. Install the LED ceiling light before the entire circuit must be checked to avoid leakage phenomenon, resulting in personal safety, before the installation of professional electrician personnel to install, do not install it privately.

  5. Confirm the working voltage of the lamp. Before powering on the lamp, make sure that the working voltage of the lamp is correct. Damage to the lamp may cause permanent damage to the lamp.

  6. Installation of LED ceiling light should be installed in the heat source and hot steam, corrosive gas sites, so as not to affect life.

  7. Before installation, be sure to cut off the power, turn off the switch, and also to prevent electric shock, before installation, please check whether the size of the installation hole to meet the requirements at the same time check the terminal and power input cable connection is strong, if loose, please lock and then Operation, otherwise it may cause the lamp can not be normal light; check the lamp and the mounting surface is smooth fit, if the gap, please make appropriate adjustments. Packing: inner packing: small carton / single outer packing: carton / 12 transport, storage requirements: LED ceiling light before the installation for the carton packaging, in the transport process is not allowed by severe mechanical shock and rain, do not touch the light bulb surface. Try not to install in places where there is heat and corrosive gas!

East Bright Technology Limited
Copyright © East Bright Technology Limited All rights reserved.